Tech News




/ / How to install Windows 10: Clean install

Share This

You can't clean install Windows 10 with out going by the upgrade we explained before. That's mainly because you don't have an product key like you do with Windows 7 or 8, so Windows 10 requires to activate automatically online after updating from an eligible copy of Windows 7 or 8.1.

When Windows 10 is activated, Microsoft can recognize your DESKTOP and associate it along with an activated and legal Windows 10 licence. This means you can perform a clean install (even on a different hard drive, so it's a good moment to upgrade to an SSD in case you have been running Windows on a standard hard drive) and Windows 10 will activate with no difficulty.

To verify if Windows 10 has activated right after updating, head to Control Panel >  System and Security >  System and look under Windows activation:
Simply if you make "significant changes" to your COMPUTER will you have to call the Microsoft account activation helpline.

To do a clean install, you'll need to go back to Step 2 in the walkthrough before, using the tool you saved to create a bootable USB drive or DVD. When that's done, turn off your personal computer, install or remove any hard drives and SSDs you would like to swap around and after that boot from your USB or DVD.

If your LAPTOP won't boot through it, go into the BIOS settings (usually click Delete, F1 or one of the other F keys just after you turn your laptop on) and make sure removable drives, or the DVD drive is set as the primary boot device, and not a hard drive. We cannot be specific about the menus and settings, because each BIOS is various.

How to fix blinking screen after Windows 10 installation

It was attracted to our focus that a lot of consumers are getting issues with the screen blinking following the Windows 10 set up.

The good news is it's repairable. 1st, restart your pc. You can try pressing Alt-F4 and choosing reboot if you can possibly do it when the display screen is flashing, but otherwise hold down the power button for approximately 10 seconds till the computer turns off. Turn it on again, however instead of logging towards Windows 10, press the on-screen power key then hold the Shift key on your keyboard while clicking the Restart option.

Windows 10 will not restart but will go to a screen with a troubleshooting option. Press this then Advanced options. Now choose to restart and you are going to see choices to go directly into Safe Mode. Any Safe Mode option will do. The COMPUTER will now begin in Safe Mode.

Press the Windows key and R together to have the Run box. Now type msconfig and click Enter. Head to the Services Tab in the window that opens. Scroll down until you find two tasks that need to be stopped:

- Problem Reports and Solution Control Panel Support
- Windows Error Report Service

Disable all these by unchecking all of them, next click Apply, Ok. Restart the pc. If that doesn't repair it, restart into Safe Mode again and right-click on the taskbar along the bottom of the screen. Choose Task Manager and after that click the tab for Startup programs. You are able to right-click on each one and disable it. This should stop the blinking screen, and after that you can turn services back on in Task Manager 1 by 1 (a reboot after each) to separate which program is causing it.

Source :

Posting Lebih Baru


Posting Lama

Tidak ada komentar:

Leave a Reply